Dynacord Usb Audio Driver

Posted on by admin
From propagamma / usb-audio:

USB Audio ASIO driver helps you connect USB audio interfaces to music applications via ASIO at latencies down to 4ms.
Features: USB-audio support for ASIO compatible applications like Cubase, Logic Audio, Reason, Native Instruments soft-synths; 32KHz, 44.1 KHz and 48 KHz sampling rate support; 16 bit, 20 bit and 24 bit sample resolution possible; ASIO 2 support and ASIO 1 compatible; Dithering (e.g. for use of a 24 bit input within a 16 bit application, or vice versa).

read more +

What do you need to know about free software?

Auxiliarys (MON, FX, AUX)

2 Pre, 2 Post, 2 Pre/Post switchable

Channels

6

CMRR, MIC input, 1 kHz

>80dB

Crosstalk

Fader and FX/AUX/MON-Send attenuation: > 85dB; Channel to Channel: < -80dB;

Depth

498.5

Digital Audio Interface

Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip

Displays

128 x 64 pixels, OLED

Effects

Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI;

Equalization

LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB / Q = 1.5 to

Equivalent Input Noise, MIC input, A-weighted, 150 ohms

-130dBu

Filter

LO-CUT, mono inputs: f=80Hz, 18dB/oct; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB

Frequency Response (-3 dB)

15Hz to 70k

Height

155

Input Impedances

MIC: 2㏀; Insert Return: > 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀

Input Sensitivity

MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV)

LINE/CD/USB GAIN (Stereo)

-10…+20dB

Maximum SPL

MIC Inputs: +21dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBu

MIC GAIN (Mono)

0…+60dB

MIC GAIN (Stereo)

+10 to +60dB

MIDI Interface

5-pin DIN connector, In / Out

Noise, Channel inputs to Master A L/R outputs, A-weighted

Master fader down: -97dBu; Master fader 0dB, Channel fader down: -91dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -83dBu

Operating Temperature Range

+5 °C…+40 °C (40 °F…105 °F)

Output Impedances

Phones: 47Ω; All other outputs: 75Ω

Phantom Power

48VDC

Mamiya 6 serial numbers. Serial Number to left of flash shoe, below MAMIYA-6 curved housing, tail of '6' is pointy (Mamiya IV), _18e042c4ae.jpg. Serial Number to left of flash. On a day-to-day basis, the Mamiya 6 is a great camera. About some of the minor defects of the Mamiya 6, like the fact that the serial numbers fall off the lenses. Jan 27, 2018 - Analysis| sets & logic| number. Mamiya-Sekor C 110mm f/2.8 Serial No. Batteries for the Mamiya M645 1000s. The Mamiya M645 uses one.

Power Consumption

Without Lamp: 45W; With Lamp: 50W

Power Requirement

100V to 240VAC, 50Hz to 60Hz

Protection

Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Switching Mode Power Supply (μC controlled): Mains Over/Undervoltage, High Temperature

Safety Class

I

Shipping Weight

12.5

Total Harmonic Distortion

<0.005

Weight Net

9.5

Width

510.5